EV1020XP9 INGROUND CAR LIFT

Description

Challenger EV1020XP9 INGROUND CAR LIFT

Challenger EV1020XP9 electric hydraulic cassette-style 10,000 lb. capacity inground lift meets the demands of professional service facilities. With a smaller footprint, your shop can maximize service bays. The EV1020 is available with either 3-stage front and rear arms or a fixed drive-on pad. Our added Quick Cycle™ models can rise in just 27 seconds and lower in only 17 seconds. Expand your service potential with our most versatile, easy-to-operate inground lift.

ALI/ETL certified.

 

 Download the EV Series Inground Lift Product Brochure
 Download the EV1020 Spec Sheet
 Download the current EV1020 Manual

Features & Benefits

• 10,000 lb. lift capacity
• 3-stage front and 3-stage rear arms provide access to the lift points of a wide range of cars and trucks, maximizing revenue potential
• Also available with a drive-on style pad (XP9) to aid in quick vehicle spotting for express bays
• 8 1/2” diameter chrome pistons provide greater stability under load
• Chrome non-breathing ram style cylinder provides for longer lift life
• Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings
• Long bearing contact provides increased stability
• Mechanical lock engages every 3? allowing ergonomic working height for technicians to increase productivity and minimize fatigue
• Stainless steel air lock release cylinder promotes longer working life with its corrosion resistant design
• Fully-contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground
• Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
• 87″ drive-thru accommodates wider vehicles, minimizes tire damage and provides for easy drive-on
• Quick Cycle™ models reduce vehicle travel time by 30 percent
• Wide range of upgrades to further customize your fleet
• Premium powder coat finish on bolsters and arms provides long-lasting durability

Specifications

Model Number	EV1020XP9
Lifting Capacity	9,000 lbs.
Arms	n/a
Stroke	68”
Rise Height	70.25”
Width Overall	31.5 / 79.75”
Drive-Thru Clearance	–
Reach (Arm Minimum)	–
Reach (Arm Maximum)	–
Screw Pad Height	Minimum Pad Height: 2.25″
Capacity	4,500 lb. per pad
Guide Plunger Diam.	8.5”
Motor / Voltage	2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise	38 s
Air Required	90 – 120 psi
ALI/ETL Certified	Yes
Super Structure Colors	Black

Accessories